Frequent Questions

  • [FAQ] AM62P: Display SubSystem (DSS): Basic Debugging and Forum Best Practices

    Part Number: AM62P Other Parts Discussed in Thread: AM62L Tool/software: This FAQ will talk about how one should perform basic debugging when facing Linux Display Related issues on AM62P / AM62x / AM62L / AM62A. In case the debugging doesn't help…

  • [FAQ] MSPM0L1306: MSPM0 Gauge L2 Development Package

    Part Number: MSPM0L1306 Other Parts Discussed in Thread: MSPM0G3507 , BQ76952 , BQ76905 Tool/software: The MSPM0 Gauge L2 can provide a leading long time SOC accuracy by utilizing a data fusion method to combines the SOC information sourced from coulometer…

  • [FAQ] MSPM0L1306: Creating a 32-Bit Timer From a 16-Bit Timer Chain on MSPM0

    Part Number: MSPM0L1306 Tool/software: Here is the example code to create a 32-Bit Timer From a 16-Bit Timer Chain on MSPM0L1306. 32bit_timer_with_2_16bit_timers_MSPM0L1306_nortos_ticlang.zip It utilizes two 16-Bit timers to create a 32-Bit timer…

  • [FAQ] AM2634: AM263X: MCRC generation procedure using external tool

    Part Number: AM2634 Tool/software: In this FAQ, i am going to explain detailed procedure for MCRC generation using external tool.

  • [FAQ] C2000WARE: Why is my DCSM configuration causing issues in my application?

    Part Number: C2000WARE Other Parts Discussed in Thread: SYSCONFIG , UNIFLASH Tool/software: This thread will discuss common issues and best practices for using DCSM on the following devices: F2807x F2837xS F2837xD F28004x F2838x F28002x…

  • [FAQ] AM2434 / AM2432 / AM2431 (ALV, ALX) Custom board hardware design - Design and Review notes for Reuse of TMDS243EVM or LP-AM243 Schematics

    Part Number: AM2432 Other Parts Discussed in Thread: TMDS64EVM , TMDS243EVM , TMDS243DC01EVM , TMDS64DC01EVM , LP-AM243 , BP-AM2BLDCSERVO , BOOSTXL-IOLINKM-8 , SYSCONFIG Tool/software: I am starting a new board design and planning to use TI EVM design…

  • [FAQ] TPS1HB08-Q1: ISNSFH at low VBB

    Part Number: TPS1HB08-Q1 Tool/software: Hello All, When operating at low VBB the RSNS value needs to be scaled to match this operating voltage. For an application reference, to get the correct ISNSFH values mentioned in the data sheet the following…

  • [FAQ] RS-232 Transceiver Resources

    [Click here to return to Transceiver Homepage] Welcome to the RS-232 Transceivers E2E page! Listed below are a variety of resources to assist with the implementation of RS-232! RS-232 Basics: RS-232 Design Guide What is RS-232? What are…

  • [FAQ] DP83869HM: Link ok vs Link status signal

    Part Number: DP83869HM Tool/software: Hi Team, What is the difference between link ok and link status in the 869 data sheet?

  • [FAQ] DAC8775: How is the SDO mode controlled in SPI?

    Other Parts Discussed in Thread: DAC8775 , DAC8771 How is the SDO mode controlled for SPI for the DAC8775 and DAC8771?

View FAQ threads
Recommended For You