Frequent Questions

  • [FAQ] SK-AM68: Enabling Arducam V3Link Camera kit on SK-AM68 and SK-AM69

    Part Number: SK-AM68 Other Parts Discussed in Thread: SK-AM69 , , AM67 , AM68A , AM69A , AM67A , AM69 How can I enable 4x IMX219 sensors using the mini fusion board from Arducam on SK-AM68, SK-AM69 and AM67? I am using SDK version 09.01.00.06 of the…

  • [FAQ] DS320PR1601: Receiver Detect Reset for x2 SSD Hot Plug Applications

    Part Number: DS320PR1601 Other Parts Discussed in Thread: DS320PR810 In this E2E FAQ, I am going to provide an overview of RX detect with specific information on the RX detect pulse width and frequency, then, I am going to discuss hot plug functionality…

  • [FAQ] AM625 / AM623 / AM620-Q1 / AM62L / AM64x/ AM243x (ALV) / AM62Ax / AM62D-Q1 / AM62Px Design Recommendations / Commonly Observed Errors during Custom board hardware design – eMMC MEMORY Interface

    Other Parts Discussed in Thread: AM62D-Q1 , AM62L , AM6442 , AM62P , AM62A7 , STRIKE , SK-AM62B-P1 , AM62P5-Q1 , AM625 , AM67 , AM6421 Hi TI Experts, Is there a list of design recommendations or commonly observed errors for eMMC MEMORY Interface during…

  • [FAQ] TPS28225: What are the design considerations for the TPS28225’s 3-State PWM Input?

    Part Number: TPS28225 3-State Input with Single Pin Controller The TPS28225 has a 3-state input that allows the controller to use a single pin to drive two output FETs as well as set both outputs low by setting the PWM pin to high impedance in the…

  • [FAQ] SENSOR-CONTROLLER-STUDIO: UART or I2C Communication Peripheral Expansion

    Part Number: SENSOR-CONTROLLER-STUDIO Sensor Controller Studio is used to write, test and debug code for the CC26xx/CC13xx Sensor Controller, enabling ultra-low power application design. The tool generates an interface driver consisting of C source…

  • [FAQ] TDA4VH-Q1: DDR_SHARED_MEM alignment requirement for RAT configuration

    Part Number: TDA4VH-Q1 Other Parts Discussed in Thread: TDA4VM , TCA9539 My SDK version: linux: ti-processor-sdk-linux-adas-j784s4-evm-09_01_00_06 rtos: ti-processor-sdk-rtos-j784s4-evm-09_01_00_06 I tried to change the heap memory size of MCU2_0…

  • [FAQ] TDA4VE-Q1: SDK9.1 GPU : OpenGL EGL returns 0x300c

    Part Number: TDA4VE-Q1 Dears, When you build your kernel and install to the filesystem, you will encountered the issue "OpenGL EGL returns 0x300c". Regards, Fredy Zhang

  • [FAQ] TMS570LC4357: Step-by-Step process to execute the LwIP demo on the TMS570LC4357 HDK board using Dynamic IP (DHCP)

    Part Number: TMS570LC4357 In this FAQ i am going to explain the Step-by-Step process to execute the LwIP demo on the TMS570LC4357 HDK board using Dynamic IP (DHCP).

  • [FAQ] AM6412: required clocks

    Part Number: AM6412 Hi All, Can you confirm that when only using PCIE and SPI/UART/DDR interfaces, only MCU_OSC0_X1 and SERDES0_REFCLK0 externally sourced clock are required for proper sequencing of the processor ? While Other MCU_EXT_REFCLK0…

  • [FAQ] PROCESSOR-SDK-AM64X: How to program TCA6424A using SoC_I2C1

    Part Number: PROCESSOR-SDK-AM64X Other Parts Discussed in Thread: TCA6424A , TMDS64EVM , TCA6424 Problem Statement Many customers have faced the issue of not being able to program TCA6424A. Their requirement varies from " setting a pin to output mode…

View FAQ threads
Recommended For You