Frequent Questions

  • [FAQ] AM62Ax, AM62x, AM64x: rti_wdt_probe error on Linux boot

    Other Parts Discussed in Thread: TLV320AIC26 , AM6252 , AM6441 , AM6421 , AM6411 I am using an AM62Ax, AM62x, or AM64x device. My part number has fewer A53 cores than the maximum number of A53 cores in that part family (see below for specific part numbers…

  • [FAQ] What are the different output types of TI Opto-emulators?

    Other Parts Discussed in Thread: ISO8710 FAQ: Isolation >> Opto-Emulators >> Current FAQ What are the different output types of TI Opto-emulators?

  • [FAQ] AM625 / AM623 / AM620-Q1 / AM625-Q1 / AM625SIP / AM62L : Custom board hardware design – USB2.0 interface

    Other Parts Discussed in Thread: AM62P , AM62A3 , AM62P-Q1 , AM62A7 , AM62D-Q1 , AM62L , AM62A7-Q1 , AM62A3-Q1 , SK-AM62B-P1 , AM625 , TUSB320 , TUSB321 , AUDIO-AM62D-EVM , ISOUSB211 , AM623 , AM2432 Hi TI Experts, I have the below queries regarding…

  • [FAQ] Extended Register Space Access for Ethernet PHYs

    Our Ethernet PHYs have a standard set of registers, 0x0-0x1F, that can be accessed in a straight forward fashion. Registers beyond 0x1F require a different approach to access. This FAQ is intended to provide a few examples on how to read/write these…

  • [FAQ] AM625 / AM623 / AM620-Q1 / AM625-Q1 / AM625SIP Custom board hardware design – Ferrite (power supply filter) recommendations for SoC supply rails

    Other Parts Discussed in Thread: AM62A7-Q1 , AM625-Q1 , AM620-Q1 , AM62A3 , AM62P-Q1 , AM62A7 , AM62P , AM625SIP , AM62A3-Q1 , AM625 , AM623 , AM62D-Q1 Hi TI Experts, I have the below queries regarding use of ferrite for the SoC supply rails. 1. Do…

  • [FAQ] AM625: eMMC timing

    Part Number: AM625 Hello, we are currently working on a SOM based on the AM62x. I am qualifying the MMC0 interface connected to a EMMC (SDINBDG4-8G-XI2). I have checked the datasheet of the AM62x and found this: I only found MMC0 timing conditions…

  • [FAQ] What is Current Transfer Ratio (CTR)?

    FAQ: Isolation >> Opto-Emulators >> Current FAQ What is Current Transfer Ratio (CTR)?

  • [FAQ] [H] Frequently Asked Questions - High Speed Amplifiers

    High-Speed Amplifiers Use the links below to find an answer to your question. If your question is not answered, feel free to post a question in our E2E forum. To see the full range of products, please visit our High-Speed Amplifiers Portfolio…

  • [FAQ] [H] High-Speed Amplifiers Power, Thermal, Quality, & Manufacturing

    Frequently Asked Questions: Amplifiers >> High Speed Amplifiers >> Power, Thermal, Quality, & Manufacturing Circuit Design Considerations Transimpedance Amplifier Circuits Fully Differential Amplifier Circuits ADC Driver Circuits Other…

  • [FAQ] [H] High-Speed Amplifiers Simulation & Modeling

    Frequently Asked Questions: Amplifiers >> High Speed Amplifiers >> Simulation & Modeling Circuit Design Considerations Transimpedance Amplifier Circuits Fully Differential Amplifier Circuits ADC Driver Circuits Other Op Amp Circuits …

View FAQ threads
Recommended For You