Frequent Questions

  • [FAQ] What data rates support which resolutions?

    Part Number: TDP2004 Tool/software: Hi Team, What data rates for DP and HDMI support which resolutions?

  • [FAQ] AM62P: Enabling BT.656 mode in DSS

    Part Number: AM62P Tool/software: This FAQ describes how to enable BT.656 in embedded syncs mode for AM62P. Similar patch can be created for other AM6x SoCs as well.

  • [FAQ] DRV8161: [FAQ]: Traditional Half-Bridge Driver VS BLDC Smart Half-Bridge Driver

    Part Number: DRV8161 Tool/software: What are the advantages or using a BLDC Smart Half-Bridge Driver over a Traditional Half-Bridge Driver? A smart half-bridge driver offers significant design and cost (space and BOM) savings as opposed to a traditional…

  • [FAQ] AM62P / AM62P-Q1 Custom board hardware design – Power supply connection and Board layout recommendations to support HS400

    Part Number: AM62P Tool/software: Hi TI Expeets, Can you provide information for AM62P HS400 support.

  • [FAQ] AM625 / AM623 / AM620-Q1 / AM625-Q1 / AM625SIP / AM62L / AM62Ax / AM62D-Q1 / AM62Px / AM64x / AM243x (ALV, ALX) Custom board hardware design – Clock Tree Tool

    Part Number: AM62A3 Other Parts Discussed in Thread: AM62L Tool/software: Hi TI Experts, Do you have suggestion for me to perform an analysis of the clock architecture for the AM62x, AM62L, AM62Ax, AM62Px and AM64x processor families

  • [FAQ] TDA4VL-Q1: Enabling and testing Inline ECC for DDR

    Part Number: TDA4VL-Q1 Other Parts Discussed in Thread: TDA4VL Tool/software: How to enable and perform single and double bit error injection on inline ECC for DDR?

  • [FAQ] AM625 / AM623 / AM620-Q1 / AM62L / AM62A / AM62P / AM62D-Q1 / AM64x / AM243x Custom board hardware design - Updates to Hardware Design Considerations and Schematic Design Guidelines collaterals

    Part Number: AM625 Other Parts Discussed in Thread: AM6442 , AM6441 , AM6422 , AM6421 , AM6412 , AM6411 , AM2434 , AM2432 , AM2431 , AM62L , , AM623 , AM620-Q1 , , , AM62A7 , AM62A7-Q1 , AM62A3 , AM62A3-Q1 , AM62A1-Q1 , AM62D-Q1 , AM62P , AM62P-Q1 Tool…

  • [FAQ] TDA4AEN-Q1: Enable srv (surround view) node on J722S

    Part Number: TDA4AEN-Q1 Tool/software: Patch to enable srv node in j722s device.

  • [FAQ] How to flash serial OSPI-NAND with Lauterbach JTAG on AM62x

    Other Parts Discussed in Thread: SK-AM62-LP AM62x Boot ROM supports booting from serial (x)SPI-NAND. Please refer to AM62x TRM "Chapter 5 Initialization" for details. The serial OSPI-NAND (Winbond W35N01JWTBAG) is on TI SK-AM62-LP board [1]. - The FAQ…

  • [FAQ] AM2434: Is TI EtherCAT solution in the Industrial Communications SDK compatible with RGMI ?

    Part Number: AM2434 Other Parts Discussed in Thread: DP83869HM , LP-AM243 , DP83869 Tool/software: Is it NOT recommended to use RGMII for EtherCAT on AM243x? On LP-AM243, RGMII is used to connect to PHY (DP83869HM), and RGMII is also used in the…

View FAQ threads
Recommended For You