What is Partial Discharge, Method a, Method b1, and Method b2 tests?

Part Number: PROCESSOR-SDK-J721E Other Parts Discussed in Thread: TDA4VM , SYSCONFIG By default in PSDKRA, CSIRX driver uses Main UDMA channels for storing the output. This article explains how to use MCU UDMA channels in the SDK/vision apps.

Part Number: LP-AM243 I have a Sitara MCU AM243x-LP PROC109E2 revision board. The CPSW based ethernet examples work out of box on the device for older SDK (08.04 and before), but in the newer SDK releases (08.05 and later), the examples don't work anymore…

Other Parts Discussed in Thread: TMDS64GPEVM , SK-AM64 , TMDS64EVM , SK-AM64B Hi TI Experts, I have the below queries regarding the selection of evaluation module. could somebody highlight the key differences between the various AM64x evaluation modules ? …

Other Parts Discussed in Thread: AM625 , AM623 , AM620-Q1 , SK-AM62 , SK-AM62-LP , SK-AM62B , SK-AM62B-P1 , AM62A7 , AM62A3 , SK-AM62A-LP Hi TI Experts, I have the below queries regarding the selection of evaluation module. could somebody highlight the key differences…

Part Number: DP83826E DP83826 in Enhanced mode has a pin which is GPIO, pin 29. This pin can be an LED or can be used as CRS. When PHY is set in RMII mode, this pin can be reprogrammed to be LED or CRS. When MII is strapped, this pin is forced to be CRS…

Part Number: DP83822I Could someone guide me on how to use DP83822 for RMII repeater mode?

Part Number: DP83822I

Part Number: DP83822I For 822/826 PHYs, Odd Nibbles Detection register need to be disable in order to prevent unexpected link loss in EtherCAT application. DP83826PHY: Odd Nibble Detection could be disable by strap 1 CLKOUT/LED1 pin in enhanced mod…