Frequent Questions

  • [FAQ] SN65DSI84: No display output with SN65DSI83, SN65DSI84, SN65DSI85

    Part Number: SN65DSI84 Other Parts Discussed in Thread: SN65DSI85 , SN65DSI83 , DSI-TUNER I have implemented the SN65DSI83, SN65DSI84, and SN65DSI85 to bridge DSI video output from my processor to LVDS input on my display. However, the display is just…

  • [FAQ] How do I change the system stack size or place sections for a TI-RTOS application in IAR project?

    I have an IAR project using TI-RTOS (also called SYS/BIOS). How do I configure the size of the kernel's system stack? The kernel configuration file has the stack size set to zero. I'd also like to specify the locations of certain sections in memory. How…

  • [FAQ] Overcurrent Protection (OCP) vs Current Regulation

    Other Parts Discussed in Thread: DRV8876 , DRV8847 , DRV8842 , DRV8874 Overcurrent protection and current regulation are often mistaken for one another. However, there are some key differences that separate these two features apart. Overcurrent Protection…

  • [FAQ] I cannot get UIA, RTOS Analyzer, System Analyzer or Execution Graph to work

    Other Parts Discussed in Thread: CC3200 I'm trying to get UIA to work with TI-RTOS (also called SYS/BIOS). Nothing comes out on RTOS Analyzer, System Analyzer or Execution Graph...what's wrong?

  • [FAQ] How do I change my Username in my profile?

    Former Member
    Former Member
    This FAQ will guide you through the steps of changing your username (display name).

  • [FAQ] What are some recommended RS-485 transceivers in TI?

    RS-485 Selection Guide RS-485 Hero Device Flyer - MM.pdf Select recommended RS-485 transceivers by supply voltage, maximum supports data rate, integrated protections, and other key feature sets. Please go to www.ti.com/rs485 for details.

  • [FAQ] Can I update the vector table with IntRegister when using TI-RTOS?

    I'm moving an application over from a non-RTOS platform to TI-RTOS. My application is crashing or getting "E_unpluggedInterrupt: Unplugged interrupt flagged: intr# 19". I have the following code that plugs the vector table in the TI-RTOS application.…

  • [FAQ] PUREPATHCONSOLE: Audio Software Access Request

    Part Number: PUREPATHCONSOLE Other Parts Discussed in Thread: TAS2563 , Hi, Recently, we have seen many questions related to PurePath Console and their plug-ins requests and access. Here you can find a detailed procedure and examples to request access…

  • [FAQ] DRV2605: Closed and Open Loop Description and Examples

    Part Number: DRV2605 Hi! One of the most common questions when using haptics drivers is related to the different modes and configurations that our devices support. In general, all our haptics drivers solutions support open and closed loop modes. Depending…

  • [FAQ] How to Trick the CCS debugger into providing a blocked TI-RTOS (SYS/BIOS) task call stack on Cortex-M devices

    Other Parts Discussed in Thread: SYSBIOS Beginning with SYS/BIOS release 6.35.02.45 , the Task module provides a non-invasive per task CallStack ROV view. The instructions below are for SYS/BIOS versions before 6.35.02.45 ( that do not support these…

View FAQ threads
Recommended For You