Hi,
I built a circuit based on a typical circuit, but the chip would burn as soon as it was powered on, which made me confused.
This is the schematic of THS3001.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Gang,
unless you made a wiring mistake, burning damage can be the result of unwanted oscillation due to instability. The best measure to achieve stability is the use of a ground plane as recommended in the THS3001's evaluation module:
I guess your layout doesn't look like this?
Kai