Other Parts Discussed in Thread: OPA4316
I couldn't find any information about Output Voltage Swing vs Output Current, the datasheet only specify the Short-circuit current.
Ironically, the item "8.3.3 Rail-to Rail Output" (page 14) says:
"For resistive loads of 10 kΩ, the output swings typically to within 30 mV of either supply rail regardless of the power-supply voltage
applied. Different load conditions change the ability of the amplifier to swing close to the rails; see typical characteristic graph Output
Voltage Swing vs Output Current()", However there is no such graph or information.
