TLV1704: COMPONENT MASS

Yves Theroux

Prodigy 110 points

Part Number: TLV1704

When looking to device mass of all TLV1704 (including SEP device) are not consistant

TLV1704IPWR is 80.7mg when all others are 57.1mg

SEP model is 115mg

are these number valid ?

is there a way to download the material declaration document per device to get mass ?

thanks

Yves

over 2 years ago

0 Clemens Ladisch over 2 years ago

Guru 243110 points

Such differences are plausible for automotive and space devices.

The "Quality, reliability & packaging data download" page has buttons "Download .xls" and "Download PDF".

0 Yves Theroux over 2 years ago

Prodigy 110 points

I agree for automotive vs SEP

but

TLV1704IPWR is 80.7

and the same part in tube

TLV1704IPW is 57.1

I think this is an error...

thanks

0 Chuck Sins over 2 years ago in reply to Yves Theroux

TI__Mastermind 23395 points

Yves

I tend to agree with you. I also think this looks like an error and I do not know which is correct. Unfortunately this is the beginning of our holiday break and I am not sure I will get an answer until everyone is back in January. I will try to find the answer today but just in case I wanted to prepare you for a potential delay in answering.

Chuck

0 Yves Theroux over 2 years ago in reply to Chuck Sins

Prodigy 110 points

No problem for the delay

I saw that LMV339IPWR is 80.7....

let me know when you get an update

Yves

0 Chuck Sins over 2 years ago in reply to Yves Theroux

TI__Mastermind 23395 points

Yves

I think that gives us a pretty good indication of which number is correct but I will get back as soon as I can with confirmation, most likely the first week of the year. Thanks for your patience.

Chuck

0 Chuck Sins over 2 years ago in reply to Chuck Sins

TI__Mastermind 23395 points

Yves

Happy New Year.

I will further pursue confirmation this week.

Chuck

+1 Chuck Sins over 2 years ago in reply to Chuck Sins

TI__Mastermind 23395 points

Yves

at this point the team reported that there is a difference in lead frame plating that is causing the difference in weights.

Chuck

0 Paul Grohe over 2 years ago in reply to Clemens Ladisch

TI__Mastermind 49896 points

All,

There is a difference in the lead frame between the "R" and non-R version. The "R" has a newer, optimized leadframe and the non-R has a legacy leadframe. The die, molds and production tests are the same - so electrically they are identical.

This is somewhat unusual...usually the "R" and non-R are the same...but not for this device.

And you are missing the "A" in the part numbers below...

TLV1704AIPW

Amplifiers

Amplifiers forum

TLV1704: COMPONENT MASS

TLV1704AIPWR