Part Number: INA125-DIE
The white Noise Value for the INA125-DIE is listed to be 0.8nV/sqrt(Hz) in the part selection table in comparison to the 38nV/sqrt(Hz) for the INA125, but no separate data sheet is linked
- Is that difference to the packaged version credible?
- Given that that value is only listed in the selection table and not in a separate datasheet, should I consider it at all to be specified?
Excerpt from part selection table:
nV/Sqrt(Hz) INA125-DIE Instrumentation Amplifier with Precision Voltage Reference 1 36 250 4 10000 0.8 Overvoltage Protection 107 2 25 0.46 0.15 0.5 --- --- INA125 Instrumentation Amplifier with Precision Voltage Reference 1 36 250 4 10000 38 Overvoltage Protection 100 2 25 0.46 0.15 0.5 -40 to 85 PDIP|16, SOIC|16