• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 48 subscribers
  • Views 133 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLV2404: TLV2404-Dual Supply Operation

krishna prasad
Intellectual 415 points
Part Number: TLV2404

Hello TI Support Team

As per the Data Sheets Page 3- Split Supply Range is +/-1.25 to +/-8V. Can we use this Part with VCC=+5V & Connect Ground to -5V.

I am trying to use as a TIA with Dual Supply in the above +/-5V Range

Thanks

Krishna.P.N.

  • 0
    TI__Genius 9366 points

    Hi Krishna, 

    Correct, you can use +/-5V for the amplifier supply. 

    Some older parts designate the negative supply pin as the "GND" pin. You can force this pin to a voltage other than GND in dual supply configuration so long as you follow datasheet recommendations. 

    Please let us know if you have any questions,

    Thanks,

    Jacob