TLV7011: TLV7011DCKR

avpreet singh

Prodigy 40 points

Part Number: TLV7011

I needed power dissipation value for TLV7011DCKR. Also what is the solder reflow profile for the following part.

7 months ago

0 Paul Grohe 7 months ago

TI__Guru 50286 points

Hello Avpreet,

The TLV7011 is a low power device. The total dissipation will depend on the output loading.

The maximum quiescent current is 10uA and max supply is 5V.

So 5V * 10uA = 50uW dissipation.

For soldering, TI qualifies to the J-STD-020D standard.

Solder reflow profile is 260 °C. This is listed in the product folder, datasheet ordering table and packing labels.

Recommended Soldering Profiles (Rev. J)

MSL Ratings and Reflow Profiles (Rev. A)

Absolute Maximum Ratings for Soldering (Rev. D)

0 avpreet singh 7 months ago in reply to Paul Grohe

Prodigy 40 points

Hi Paul, Per datasheet for TLV7011DCKR I see that Max Vcc is 6V and in recommended it's 5.5 but for test conditions they've specified 5V. What should be the reading that i'll need to consider as recommended ?

0 Paul Grohe 7 months ago in reply to avpreet singh

TI__Guru 50286 points

Hello Avpreet,

5V or 5.5V, whichever you prefer. It really does not make a big difference in the overall operation of the device. The recommended operating conditions table is actually a range of 1.65 to 5.5V, so 5V is within that range.

The specs in the electrical table are at 5V, so I'd just use 5V.

Amplifiers

Amplifiers forum

TLV7011: TLV7011DCKR

Recommended Soldering Profiles (Rev. J)

MSL Ratings and Reflow Profiles (Rev. A)

Absolute Maximum Ratings for Soldering (Rev. D)