Other Parts Discussed in Thread: AMC23C10, TLV9001
We use several different resistors that are externally identical during product assembly. I would like to design a device that would verify the correct resistor is selected by the assembly operator. The AMC23C10EVM seems to fit the description, but I'm not sure where to go from here. Would I need 3 separate power supplies for the 2 reference voltages as well as the input voltage that runs through the resistor? Or can I use a single 5V or 12V power supply split into parallel?
I would need at least 40 of these devices, so simplicity would be ideal. I'm a mechanical engineer so I'm a bit out of my depth when it comes to circuit design.