• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 48 subscribers
  • Views 180 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

OPA855: OPA855 Circuit Analysis and Debugging

OPA855: OPA855 Circuit Analysis and Debugging 2

Anurag
Prodigy 60 points
Part Number: OPA855

Hi,

Please see 

OPA855: OPA855 Circuit Analysis and Debugging - Amplifiers forum - Amplifiers - TI E2E support forums

Can you confirm that you are driving the input with a 50 ohm impedance input source? If the input source has a different impedance, the input will not be properly matched and you will see reflections that will result in distortion or instability.

--> Yes, I am using function generator. Its output mentioned 50E.

Please see and confirm its OK.