This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AMC1211-Q1: AMC1211AQDWVQ1

Part Number: AMC1211-Q1

Tool/software:

i am using AMC1211AQDWVQ1 part as analog isolator and i would like to add protection diode as BAS116 to input pin. do we have any restriction to add protection diode which is pulled up with +5v and one will be added  as pull down with GND 

can you please recommend