I'd like to hear from anybody familiar with XTR115 or XTR116 on their recommendations how to convert 0-1000 Ohm linear resistance to 4-20mA...
Any circuit ideas or schematic examples other than going full bridge front end?
John
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Take a look at this thread
http://e2e.ti.com/support/amplifiers/etc_amplifiers__other_linear/f/18/p/88513/307748.aspx#307748