• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 2 answers
  • Subscribers 49 subscribers
  • Views 279 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMV981-N: CDM and latch up current

lanjie Liu103016
Intellectual 820 points
Part Number: LMV981-N
Other Parts Discussed in Thread: TLV9001

Our customer need LMV981MFX ESD CDM level and CDM test standard ,AND latch current paremeter 

I don't see the parameters in datasheet, where can I get the parameters or reference , thanks.

  • 0
    TI__Mastermind 30600 points
    Hi Lanjie,

    The CDM and latch-up current parameters were not tested for this device and are not included in the datasheet. If you need a similar device with specified CDM and HBM values, try the TLV9001.

    Best,
    Paul
  • 0
    TI__Intellectual 775 points

    HI Lanjie,

    This device is about 20 years old and unfortunately, there is no data for CDM. If you provide some further information on your application and part requirement, I can help you find a part which does specify CDM in the datasheet and meet your requirement.

    For the latch-up Current test (I-test) is at 200mA.

    Regards,

    Sanjeev