• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 47 subscribers
  • Views 875 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLV8541: Pspice model

Justine
Prodigy 40 points

Part Number: TLV8541
Other Parts Discussed in Thread: TINA-TI

Hi,

I would like to simulate the component in Pspice, but I can't convert from the Tina spice model.
Would you have a pspice model, or is there a proper way to convert it ?

Thank You
Justine

  • Former Member
    0 Former Member

    Hello Justine,

    The TINA-TI and PSpice models should be cross compatible.  If you open the ".cir" file for TINA, you will see a syntax that is the same as the models used for PSpice.  So you can follow these steps to use your TINA-TI file with OrCAD and simulate in PSpice:

    1. Rename the ".cir" file into a ".lib" and import it

    2. Link your model to an OrCAD capture symbol

    3. Place the symbol in your design

    4. Configure PSpice library

    You should now be good to go.  Please let me know if you need any further help or details.

    Regards,

    Daniel