This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I'm trying to get a small MOSFET half bridge running, but get always a convergence problem. I have changed some parameters but get not rid of the convergence problem.So need some help how to get the transient analysis running.iPM-half_bridge-01.TSC
Hello,
Thank you for your inquiry about TINA. Since TINA is a DesignSoft/TINA program, questions are handled by using the DesignSoft support page: http://www.tina.com/technical-support/ .
The DesignSoft/TINA team is very helpful and this is the most direct way for TINA support. Please advise by Reply when the issue has been resolved.
Regards,
~Leonard
Hi Kai.
thank you very much for your hints. Meanwhile I imported the spice models in LTspice and it runs like a charm
Josef
To get a comparision between LTspice and TINA I tried your hint and changed the two parameters, but unfortunately have still the convergence problem.
Josef
Hi Kai,
I did not change the design file. I changed only the two parameters you mentioned.