This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

TLV3501: The TLV3501 simulation output is not normal

Intellectual 350 points

Replies: 2

Views: 184

Part Number: TLV3501

The TLV3501 simulation output is not normal, the output amplitude is in pV. I don't know the reason, the simulation file is attached.

  • The simulation file is attached.BJ_TEST.TSC

  • In reply to user4499359:

    Hello,

    Change the simulation settings to use "Zero Initial Values".

    Click Analysis -> Transient.

    Select the "Zero Initial Values" radio button.

    Click OK and run the simulation. It should run faster and give the correct output.

    Not sure what the issue is, but I usually use this mode as it provides more "honest" results, particularly during start-ups (and makes oscillators work).

    Regards,

    Paul Grohe

    TI Comparators (CMPS) Applications Group

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.