Hi,
Is it possible to check the modulation characteristics (VCO modulation)?
For reference, I attach a characteristic graph displayed by ADI's ADIsimPLL.
Is it possible to display such a graph in [PLLatinum Sim] as well?
Thanks,
Astro
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
Is it possible to check the modulation characteristics (VCO modulation)?
For reference, I attach a characteristic graph displayed by ADI's ADIsimPLL.
Is it possible to display such a graph in [PLLatinum Sim] as well?
Thanks,
Astro
Hello Astro,
PLLatinum Sim does not have the phase shift curve as shown in the figure above, however, it does have the amplitude curve. To obtain it:
- Select your device in the start page under (1) "Select Device" tab, then (2) select "LMX2430," and finally (3) click on "Load Device" button:
- Click on (1) "Bode Plot" tab and then on the (2) advanced option on the left to obtain the VCO gain curve:
Hope this helps!
Good Luck,
Andrea