Please tell me how to readback all registers listed in table.16 in the datasheet.
※ LMK04805 datasheet
<www.ti.com/.../lmk04805.pdf
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Toshi,
1. Configure the device where you want to get the read back data output. For example,
2. Program register R31 to which register you want to read back. For example, I want to read back R26, I write 0x001A003F to the device.
3. Program R31 again. The read back data will be coming out from the Status_Holdover pin. Use the falling edge of CLK signal to sample the data.