Tool/software:
Hi,
I just want to configure CLKoutY LMK04832 as CMOS format as below figures shown, and have two questions about it:
1. CMOS(Norm/Norm) means that CLKoutY_P is normal 3.3v LVCOMS Clock output and CLKoutY_N is normal 3.3v LVCOMS Clock output too， right？
2. When CLKoutY is configured as CMOS(Norm/Norm) format, how about skew or delay between CLKoutY_P and CLKoutY_N?
Thanks in advance！
Best regards！
Jason
Jason,
1. CMOS(Norm/Norm) means that CLKoutY_P is normal 3.3v LVCOMS Clock output and CLKoutY_N is normal 3.3v LVCOMS Clock output too， right？
Correct, normal meaning it's not 180 degrees out of phase with the "normal" signal.
2. When CLKoutY is configured as CMOS(Norm/Norm) format, how about skew or delay between CLKoutY_P and CLKoutY_N?
We do not have the validation data for this, but I would assume is less than 35ps (or less than skew of 2 outputs in the same CLKout pair).
Best,
Andrea
