• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 20 subscribers
  • Views 592 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

CDCM7005-SP Evaluation Board

CDCM7005EVM-CVAL: CDCM7005-SP Evaluation Board

Miles Darnell
Prodigy 45 points
Part Number: CDCM7005EVM-CVAL
Other Parts Discussed in Thread: CDCM7005-SP

Hello,

I have the 2018 release of CDCM7005-SP EVM GUI.  What is the correct adapter cable to connect to SPI interface of the eval board?

thanks,

Miles

  • 0
    TI__Genius 14540 points
    Hi,

    The 2018 GUI release supports USB connection to the PC and the new version of the EVM. If you received an EVM in the past, then it would have a parallel port on it and require the older GUI. Do you have an EVM in hand? The published User's Guide has not been updated yet to reflect these changes. This will be available in the near future.

    Thanks
    Christian
  • 0 in reply to Christian Yots
    Prodigy 45 points

    I just spent $800 last week on the EVM that has a parallel port.  I don't have any hardware to speak parallel port.  How can I get a USB eval card?  What is recommended to connect the old parallel port GUI to parallel port eval card using windows 7 USB only hardware?

  • 0 in reply to Miles Darnell
    TI__Genius 14540 points
    Hi Mike,
    Sorry about this. I don't understand how you received an older EVM as I was told we had depleted this stock and only had the new EVMs available. I will send you the new EVM direct to you. I'll contact you via email to get your shipping details.

    Thanks,
    Chrsitian