• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 109 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN65LVDS93A-Q1: Inquiries regarding the use of SN65LVDS93A-Q1, SN65LVDS93B-Q1

Grady Lee
Genius 3105 points
Part Number: SN65LVDS93A-Q1
Other Parts Discussed in Thread: DS90CF383B, , SN65LVDS93B-Q1

Hi, TI expert

The customer was using DS90CF383MTD, but was looking for a replacement due to discontinuation.

So, DS90CF383B was recommended, but the operating temperature was -10 to 70 degrees, which did not meet the spec. (The specification of the customer’s product is -40 to 85 degrees.)

Accordingly, the two items that the customer directly searched for were SN65LVDS93AIDGGRQ1 and SN65LVDS93BIDGGRQ1. (Actually used P-CLK is 50~70MHz.)

The customer purchased samples of SN65LVDS93AIDGGRQ1 and SN65LVDS93BIDGGRQ1 and conducted a test.

However, upon review, a malfunction was confirmed as described in the attached review.

Q1) Can you provide technical help to solve the problem? (See attached file below)

Q2) Will there be any problem if I use SN65LVDS93A-Q1 or SN65LVDS93B-Q1 as a replacement for DS90CF383MTD?

Please check. Thank you.

LVDS IC_Review result.pptx

  • +1
    TI__Genius 9335 points

    Hi Grady,

    Who is the customer?

    Grady Lee said:
    Q2) Will there be any problem if I use SN65LVDS93A-Q1 or SN65LVDS93B-Q1 as a replacement for DS90CF383MTD?

    These devices are both suitable replacements for the DS90CF383MTD based on the outlined requirements of the customer's system. 

    Grady Lee said:
    Q1) Can you provide technical help to solve the problem?

    Which device is the customer witnessing the abnormal behavior on? The SN65LVDS93A-Q1 or SN65LVDS93B-Q1? In either instance, this seems to be related to how the incoming data bits are being mapped. What color format is the customer using (i.e. 888, 666, 656)?

    Best,

    Nikolas