Texas Instruments (TI) Interface support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search interface IC content or ask technical support questions on everything from ESD protection to interfacing with USB, Ethernet, and HDMI. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] DP83867E & DP83869HM: Expected Back-Powering on Power Supply Pins

    Part Number: DP83867E DP83869HM Other Parts Discussed in Thread: DP83869HM Tool/software: The following FAQ applies to the DP83869HM and all versions of the DP83867: E/IS/CS/IR/CR The Analog Supply pins (VDDA2P5 & VDDA1P8) power the MDI portion…

  • [FAQ] What Connections of I2C Buffers are not Allowed?

    Other Parts Discussed in Thread: TCA9617B , TCA9509 , TCA9801 , TCA9800 , TCA9803 , TCA9802 , TCA9511A , TCA4307 FAQ: Logic and Voltage Translation > IxC >> What Connections of I2C Buffers are not Allowed ? Part Numbers: TCA9517 , TCA9517A , TCA9509…

  • [FAQ] What are the different I2C Buffer Direction Control Mechanisms?

    Other Parts Discussed in Thread: TCA9517A , TCA9517 , TCA9511A , TCA4307 FAQ: Logic and Voltage Translation > IxC >> What are the different I2C Buffer Direction Control Mechanisms ? I2C buffers implement direction control mechanisms to determine which…

  • [FAQ] DP83822I: Does Oscillator Clock or other external clock source to XI pin need to be stable before PHY power?

    Part Number: DP83822I Tool/software: Yes, Clock in external clock mode shall be available at power ramp. If not available, it is recommended to hold RESET_N low and release it at least 100 us aer external clock is stable.

  • [FAQ] What is the "VILC" Electrical Spec in I2C Buffers?

    Other Parts Discussed in Thread: TCA9517A Part Numbers: TCA9517A , TCA9517 , TCA9509 FAQ: Logic and Voltage Translation > IxC >> What is the "VILC" Electrical Spec in I2C Buffers ? VILC = Input LOW Contention Voltage VILC is the internal voltage…

  • [FAQ] What is a buffered LOW?

    Part Number: TCA9517 Other Parts Discussed in Thread: TCA9617B FAQ: Logic and Voltage Transla tion > IxC >> What is a buffered LOW ? A "buffered LOW" is the output voltage of the buffer when a low voltage input (VIL) is present on the input. This…

  • [FAQ] SN65DSI8x Programming Tools

    Part Number: SN65DSI84 Other Parts Discussed in Thread: SN65DSI85 , SN65DSI83 , SN65DSI86 Tool/software: DSI Tuner Tool (SN65DSI83, SN65DSI84, SN65DSI85): This tool is used to translate the video timings of the LVDS panel bein used to register values…

  • [FAQ] TUSB211A: How does a USB2 redriver boost the signal that passes through it?

    Part Number: TUSB211A Tool/software: How does a USB2 redrivers boost the signals that come through it? I do not understand how this is possible since some redrivers do not need to be directly incorporated into the trace to process and boost the signal…

  • [FAQ] TUSB211A: Why do some USB2 redrivers not need to be directly integrated?

    Part Number: TUSB211A Other Parts Discussed in Thread: TUSB217A , TUSB214 , TUSB211 , TUSB216 , TUSB212 Tool/software: Some USB2 redrivers do not need to be directly integrated into a trace, and can just be placed over the trace. Why is that? Won't this…

  • [FAQ] DS280DF810EVM: How to reflash USB2ANY for use with SigCon Architect GUI

    Part Number: DS280DF810EVM Other Parts Discussed in Thread: USB2ANY Tool/software: In this FAQ, I will explain how to reflash a USB2ANY device to interface between an EVM board and SigCon Architect GUI. This FAQ applies to any EVM which is controlled…

View FAQ threads