• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 82 subscribers
  • Views 256 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TMS320F28034: CBC being set at start of code before main modules reached

TMS320F28034: TMS320F28034 CAN Module

Derek Zhong
Intellectual 470 points

Part Number: TMS320F28034

Dear TI,

This is Derek from Distributor Arrow Asia.

My key customer is using TMS320F28034 to do motor control,  they found some error when config CAN communication module, could you check the ASM code and provide a right configuation of CAN Module Regiser.

It is better for you to post me by mail: Derek.zhong@arrow.com to discuss with customer together, Wait for your reply. Thank you.

test_28034.rar

  • 0
    TI__Guru* 95315 points

    Derek,

                  Debugging customer code is not something we can support on e2e, especially code written in assembly. In some rare instances, we may look at small snippets of code, but not the whole project. Is there a reason why customer is writing code in assembly, rather than C? What would be helpful is for customer to explain the difficulty they are encountering and I would be happy to help. 

    Please have customer download my Application report http://www.ti.com/lit/spra876. It has many tested examples. I also urge them to look at the Debug tips provided.