BQ28Z610 FAQ Home Page

This is the home page for common questions in relation to the BQ28Z610 and BQ28Z610-R1.

FAQs

Related FAQ home pages:

Impedance Track FAQ home Page

What information does TI need to help with learning/accuracy/operation related questions?

• Why does Valid Charge Termination (VCT) take less or more than 80 seconds to trigger?
• How long does the voltage on the PACK pin need to be applied to wake-up the gauge?
• What are the differences between hardware and firmware protections?
• How Many FETs Can Gauges With Integrated Protection Drive?
• SHA-1 Authentication Flow
• What is the TI BMS Flashstream file format?
  
• How to change the security key through Advanced Comm I2C on BQStudio?

Application Notes

• Simple Guide to Chemical ID Selection Tool (GPC)
• How to complete a successful learning cycle with the bq28z610/bq78z100
• Gauge Communication
• TI Fuel Gauge Authentication Key Packager and Programmer Tools
• Advanced Charge Algorithm
• Autonomous Smart Battery Guide
• A Simple Battery Simulator

Older application notes with applicable information:

• Fast Cell Balancing Using External MOSFET

Other Documentation

• How to choose a multicell gauge
• How active and passive cell balancing work

Change Lists

• BQ28Z610 to BQ28Z610-R1 Change List
  
  

Firmware Download

Download the most recent firmware version to get the newest features and fixes.

https://www.ti.com/tool/BQ28Z610-DEVICE-FW