This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Dear Expert
After select Chem ID ,but could not program the Chem ID in BQ34Z100-R2.
Below is register window:
Below is chem ID programing error window .
I check the hardware CE Pin is high and 2.5V output is normal ,could u hlep to give suggstion,thanks!
Hi,
It is related to the FW on the gauge or not having the correct .bqz
Please let me know if these threads do not help you solve your issue.
Regards,
Diego