Texas Instruments (TI) Power management support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search power management IC content or ask technical support questions on everything from linear and DC/DC switching regulators to battery management and LED drivers. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Part Number: UCC27301A-Q1 Other Parts Discussed in Thread: UCC27282-Q1
Tool/software:
Wireless charging for mobile devices in automobiles is a common and convenient feature. These chargers are typically powered from the 12V battery system but in some…
Part Number: BQ25750
Tool/software:
By default, the BQ25750 has an automatic power path switchover. When the VAC power is out the of range set by the ACUV/ACOV resistors, system power will change to VBAT. When VAC is in range again, system power will…
Other Parts Discussed in Thread: LMG1020 , UCC57108
TI gate drivers use a pull-up and pull-down structure in the output stage in order to drive a power device. The pull-up structure supplies the source current to turn on the power device, and the pull…
TI's gate drivers use a pull-up and pull-down structure in order to drive the output stage. The pull-up structure supplies the source current to turn on the power device, and the pull-down structure supplies the sink current to turn off the power device…
Other Parts Discussed in Thread: BQ25892 , BQ25895 , BQ25895M , BQ25890H , BQ25890 , BQ25896 , BQ25898 , BQ25898D , BQ25898C
BQ2589x FAQ Home Page
This home page is for common questions in relation to the BQ25890, BQ25890H, BQ25892, BQ25895, BQ25895M…
Part Number: BQ25890H Other Parts Discussed in Thread: BQ25890 , Tool/software: The differences on the BQ25890H compared to the BQ25890 are as follows.
At startup in charge mode the H version not only does regular D+/D- detection the same as BQ25890…
Part Number: BQ76952 Tool/software: On the BQ76952 EVM, there is a resistive cell simulator made up of 200-Ω series resistors (BQ76952EVM User's Guide (Rev. A) Fig. 5-10). I want to know how to install this cell simulator.
Part Number: LP5812 Other Parts Discussed in Thread: LP5810 , Tool/software: How to program LP5812, LP5810 in direct drive mode or TCM drive mode with auto or manual control?
Part Number: LP5813 Other Parts Discussed in Thread: LP5811 , Tool/software: How to program LP5813, LP5811 in direct drive mode or TCM drive mode with auto or manual control?
