Hi Ti,
Our EE engineering want to do compliance test on Ti83867 on our EVM board but got some problem.
We move to TI AM6548 EVM board with Linux RT inside and try to set the register of Ti83867 according to the document below:
In the document, we choose 1000 Base Test Mode 1, and set the register by mdio-tool.
As you can see below, after we set register 0x25 and 0x1D5, we got 0 for both register.
Shouldn't they are 0x480 and 0xF508?
Is that correct? Or we lost any steps here?
Thanks.
Eric