Texas Instruments (TI) Processors support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search processors content or ask technical support questions on Sitara™ processors, digital signal processors (DSP) and automotive processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] TDA4VH: EMMC BOOT0 booting from Linux Space

    Part Number: TDA4VH Tool/software: Q1:How can I program bootloader binaries including tiboot3.bin, tispl.bin and u-boot.img to either mmcblk0boot0 or mmcblk0boot1 at linux space instead of u-boot space? Q2:In addition, how can I control which boot…

  • [FAQ] TDA4VM-Q1: Non-sequence camera connection for multi_cam_demo_app

    Part Number: TDA4VM-Q1 Tool/software: Non-sequence camera connection for multi_cam_demo_app.

  • [FAQ] What Ethernet pinmux combinations are valid on AM64x processors?

    Part Number: AM6421 Other Parts Discussed in Thread: SYSCONFIG Tool/software: The AM64x processor family is able to support a total of 4 PRU_ICSSG Ethernet ports and 2 CPSW Ethernet ports. However, due to pinmux restrictions, only a maximum of 5 Ethernet…

  • [FAQ] TDA4VH-Q1: Running SDL applications on Freertos/Safertos

    Part Number: TDA4VH-Q1 Tool/software: Can SDL applications be run on Freertos/Safertos? If yes, what are the changes to be made?

  • [FAQ] J721S2XSOMXEVM: How to Enable Out of Place authentication in SBL

    Part Number: J721S2XSOMXEVM Tool/software: How to Enable Out of Place authentication in SBL?

  • [FAQ] PROCESSOR-SDK-AM64X: Linux hangs after restarting an R5F core

    Part Number: PROCESSOR-SDK-AM64X Tool/software: I am using AM64x Linux SDK 10.0 (or potentially the latest AM64x Linux SDK 9.2.1). When I use the Linux remoteproc driver to shut down an R5F core, and boot it back up, my processor hangs. An example…

  • [FAQ] AM654x, AM652x : Data sheet Documentation (about timing) of the power sequencing

    Part Number: AM6548 Tool/software: Hi TI experts, On page 142 of the datasheet "AM654x, AM652x Sitara Processors Silicon Revision 2.1 datasheet (Rev. C)", Figure 6-4. Power-Up Sequencing using On Chip Power-on-reset (POR) has labels such as "Note…

  • [FAQ] AM6422: How to configure the PCIe align with the simulation results.?

    Part Number: AM6422 Tool/software: Hi, I am setting the PCIe configuration. We simulated the PCIe using the IBIS model of AM6422. Below picture is the configuration we could get best simulation results. We don't know how to set it in AM6422 software…

  • [FAQ] AM625 / AM623 / AM620-Q1 / AM625-Q1 / AM625SIP: eMMC0_DAT0 not enabled pull up by ROM

    Part Number: AM625 Tool/software: #1. On my customer board using eMMC0 boot, did not pull up eMMC0_DAT0, occasionally can't boot up by Power On, but can boot up by warm reset or power cycle. #2. Add pull up on eMMC_DAT0, can boot up always so far…

  • [FAQ] AM625 / AM623 / AM620-Q1 / AM62L / AM62A / AM62P / AM62D-Q1 / AM64x / AM243x Design Recommendations / Custom board hardware design - Data sheet Pin Attributes and Pin connectivity related queries

    Part Number: AM625 Tool/software: Hi TI Experts, I have the below query regarding the data sheet Pin attributes Pin attributes I have a number of IOs that are not used, is there a connection recommendation Is there a recommendation for the…

View FAQ threads
  • Threads 198114 Discussions