Texas Instruments (TI) Processors support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search processors content or ask technical support questions on Sitara™ processors, digital signal processors (DSP) and automotive processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] TDA4VM: TDA4VL : Can you list out the difference of features supported in SDK's for CDD IPC and PDK IPC ?

    Part Number: TDA4VM Hello, Can you list out the difference of supported features in CDD IPC and PDK IPC based on SDK versions ? Regards Tarun Mukesh

  • [FAQ] AM6442: GPIO Input Interrupt Sciclient config failed in MCU PLUS SDK Version 6.0 & above

    Part Number: AM6442 Hi, There is a concern around running GPIO Input Interrupt MCU PLUS SDK example on AM64x. One might get an error message saying: MAIN_Cortex_R5_0_0] [Error] Sciclient event config failed!!! ASSERT: 0.12970s: syscfg/ti_drivers_config…

  • [FAQ] PROCESSOR-SDK-AM57X: How to enable the matrix GUI 2.0 for AM57x devices in Linux?

    Part Number: PROCESSOR-SDK-AM57X The matrix GUI is an app that lets you see many different application demos from AM57 including some statistics.

  • [FAQ] J7200XSOMXEVM: How to change the console for keywriter

    Part Number: J7200XSOMXEVM The default console used by the TI keywriter is MCU_UART. In case that MCU_UART is not brought out on the custom boards how can we switch the keywriter console to other UART instances for example MAIN_UART0

  • [FAQ] J784S4XEVM: How to enable second PCIe slot for two SSD cards

    Part Number: J784S4XEVM By default, the second PCIe slot is not configured for PCIe root complex mode from the SoC-side, meaning if we wanted to connect an end point device like a NVMe SSD card, the link does not go up. When connecting a NVMe SSD…

  • [FAQ] How to get started with resource partitioning tool ?

    Other Parts Discussed in Thread: SYSCONFIG Hi, I want to use resource partitioning tool but I don't know how to get started ? This FAQ covers up to SDK 8.6. For an FAQ that covers SDK 9.0 & 9.1, please see e2e.ti.com/.../faq-how-to-use-k3-resource…

  • [FAQ] AM6442: AM64X : How do I port IPC examples to RTOS projects from No RTOS Projects ?

    Part Number: AM6442 Other Parts Discussed in Thread: SYSCONFIG I have imported two example codes, as mentioned below. 1. empty_am64x-evm_r5fss0-1_freertos_ti-arm-clang 2. ipc_rpmsg_echo_am64x-evm_r5fss0-0_freertos_ti-arm-clang My goal is to do IPC…

  • [FAQ] PROCESSOR-SDK-AM62X: Profiling CPU Cycles in Application Using Cycle Counter

    Part Number: PROCESSOR-SDK-AM64X Hi, There is a concern around figuring out a way to profile your application, and compute time in microseconds. We will see an approach to do the same and look at how we can compute the time as well. Thanks…

  • [FAQ] PROCESSOR-SDK-AM65X: Steps to build and flash linux sdk image

    Part Number: PROCESSOR-SDK-AM65X Can you provide steps to build and flash Linux sdk image (using SDK release baseline + commit from Github)?

  • [FAQ] PROCESSOR-SDK-AM64X: EtherCAT MainDevice with TI Sitara MPU Devices

    Part Number: PROCESSOR-SDK-AM64X Hello Experts, I need to implement a standalone EtherCAT MDevice (MainDevice) on TI Sitara MPU Devices. My issue is where will I get a master stack to run on it? Also will there be some sample MDevice stack with…

View FAQ threads
  • Threads 198453 Discussions