Texas Instruments (TI) Processors support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search processors content or ask technical support questions on Sitara™ processors, digital signal processors (DSP) and automotive processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] AM625: rise time and fall time required for lpddr4 ,emmc,RMII signals

    Part Number: AM625 Hi We want to know the rise time and fall time of AM625x interfaces such as lpddr4,eMMC,RMII. The datasheet contains information about OLDI rise time and fall time but not other interfaces.

  • [FAQ] PROCESSOR-SDK-AM62X: Run MCU-PLUS-SDK Examples From R5_0_0 Core Using SBL NULL

    Part Number: PROCESSOR-SDK-AM62X Other Parts Discussed in Thread: UNIFLASH Hi, After reading this FAQ: You will be able to run the MCU PLUS SDK R5_0_0 examples via SBL Null . You will be able to see the output of the SDK examples on the WAKEUP…

  • [FAQ] PROCESSOR-SDK-AM64X: AM64x: NoRTOS: http server example static ip adress configuration

    Part Number: PROCESSOR-SDK-AM64X Hi, Problem Statement : When we run below example, After Network link up, code is waiting for certain timeout and after about 4 minutes later my netif struct gets constant ip adress. After this timeout I can ping to…

  • [FAQ] PROCESSOR-SDK-AM64X: Enet Layer 2 CPSW Example not working on AM64x MCU+ SDK 08.05.00.24

    Part Number: PROCESSOR-SDK-AM64X Hi, This is known issue with MCUSDK 8.5. Planned to be fixed in upcoming release. Note : What I am discussing here is just a workaround not a clean fix. Steps to check : Please refer https://e2e.ti.com/support…

  • [FAQ] J7200XSOMXEVM: How do I enable CAN with Linux driver on J7200?

    Part Number: J7200XSOMXEVM By default, CAN is not enabled on Linux for J7200. How can I enable CAN on PSDK Linux 8.5?

  • [FAQ] TDA4VM: How to change the MAC-only port mapped to A72 (Linux) client in Ethernet Firmware + Linux Use Case?

    Part Number: TDA4VM How to change the MAC only port mapped to A72 (Linux) client in case of Ethernet Firmware + Linux Use Case?

  • [FAQ] TDA4VM: How is the EVM(board) to device tree mapped? How are the peripherals organized in a device tree?

    Part Number: TDA4VM There are multiple peripherals and multiple dts files. Is there a hierarchy? How can we map the dts files to the J7 board/SOM/SOC?

  • [FAQ] How to add/map MAC-only port to A72 (Linux) client in Ethernet Firmware + Linux Use Case?

    How to add/map MAC-only port to A72 (Linux) client along with default MAC Port-1 in Ethernet Firmware + Linux Use Case?

  • [FAQ] PROCESSOR-SDK-J721E: Changes required for interfacing eDP output with external serializer

    Part Number: PROCESSOR-SDK-J721E This article explains changes required in the PSDKRA driver for interfacing eDP output to external serializer.

  • [FAQ] PROCESSOR-SDK-J721S2: How to enable QoS for DSS in SBL or in SPL boot flow?

    Part Number: PROCESSOR-SDK-J721S2 This article provides patches to enable QoS settings for DSS in SBL and SPL bootflow.

View FAQ threads
  • Threads 198298 Discussions