Texas Instruments (TI) Processors support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search processors content or ask technical support questions on Sitara™ processors, digital signal processors (DSP) and automotive processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] J784S4XEVM: Enable USB3.0 functionality on lane 2 of TDA4VH

    Other Parts Discussed in Thread: TDA4VH How to enable the USB 3.0 functionality on lane 3 of J784S4 evm?

  • [FAQ] TDA4VL-Q1: Change GTC Clock frequency to 200MHz for SBL boot flow

    Part Number: TDA4VL-Q1 For SDK 9.0 to latest, we see that the GTC frequency in the SBL boot flow is 250MHz, whereas in the SPL boot flow it is 200MHz. How to set the GTC to 200MHz in SBL?

  • [FAQ] SK-TDA4VM: Why Does Encoding Fail in TDA4VM-SK Edge-AI 9.1 SDK?

    Part Number: SK-TDA4VM Why is my basic GStreamer encode pipeline failing as a result of "Failed to allocate required memory" in Edge-AI 9.1 SDK?

  • [FAQ] AM623: RGMII Input Slew Rate for CPSW3G

    Part Number: AM623 Hi We are having trouble achieving the input slew rates of 2.64V/ns ... 5V/ns for the RGMII signals defined in the AM62x Rev B datasheet (SPRSP58B), Table 7-33. Are the values correct for 1.8V? Because the RMII interface, which uses…

  • [FAQ] AM6x: Latest FAQs on AM62x, AM62Ax, AM62D-Q1, AM62Px, AM62L, AM64x, AM24x, AM3x, AM4x Sitara devices

    Other Parts Discussed in Thread: AM62P , AM62P-Q1 , AM625-Q1 , AM620-Q1 , AM625 , AM62D-Q1 , AM62L , AM625SIP , AM623 , PROCESSOR-SDK-AM62X , AM2432 , AM2431 , LP-AM243 , TMDS243EVM , AM2434 , AM6442 , AM6411 , AM6422 , AM6412 , AM6421 , AM6441 , SK-AM64B…

  • [FAQ] AM62P / AM62P-Q1 - Custom board hardware design - Design and Review notes for Reuse of SK-AM62P-LP Schematics

    Part Number: AM62P Hi TI Experts, I am starting a new board design and planning to use TI Starter Kit (SK) design files for designing my custom board. https://www.ti.com/tool/SK-AM62P-LP Please let me know if you have any recommendations or guidelines…

  • [FAQ] AM62A7 / AM62A7-Q1 / AM62A3 / AM62A3-Q1 / AM62A1-Q1 / AM62D-Q1 - Custom board hardware design - Design and Review notes for Reuse of SK-AM62A-LP Schematics

    Part Number: AM62A7 Other Parts Discussed in Thread: SK-AM62A-LP Hi TI Experts, I am starting a new board design and planning to use TI Starter Kit (SK) design files for designing my custom board. https://www.ti.com/tool/SK-AM62A-LP Please let…

  • [FAQ] TDA4VM: What changes are required in Ethernet Firmware to remove gPTP support and forward the gPTP frames to the Ethernet Client?

    Part Number: TDA4VM What changes are required in Ethernet Firmware to remove gPTP support and forward the gPTP frames to the Ethernet Client?

  • [FAQ] TDA4VM: How to switch channels using the mosaic node

    Part Number: TDA4VM As the mosaic node takes in object array as input and does not have vxreplicateNode implemented, how to enable switch channel in this node?

  • [FAQ] TDA4VM: IPC Debug steps

    Part Number: TDA4VM Hello, May i know how to debug IPC and see if its working fine? Regards Tarun Mukesh

View FAQ threads
  • Threads 198377 Discussions