Texas Instruments (TI) Processors support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search processors content or ask technical support questions on Sitara™ processors, digital signal processors (DSP) and automotive processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] AM623: Package's PAD/SMO information needed.

    Part Number: AM623 Tool/software: The following E2E FAQ includes very useful information, https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1203441/faq-am62a3-am62a3-q1-custom-board-hardware-design-collaterals-to-get-started…

  • [FAQ] J784S4XEVM: How to configure PSLC in eMMC

    Part Number: J784S4XEVM Tool/software: Hi Gokul, Can you help me with configuring PSLC in eMMC.

  • [FAQ] PROCESSOR-SDK-J721S2: How to enable second DSI instance on J721S2 device.

    Part Number: PROCESSOR-SDK-J721S2 Tool/software: J721S2 devices support two DSI outputs from Display subsystem. The first DSI output ie DSI0 is already supported in the processor SDK RTOS and this is available via DSI to DP convertor on the EVM. The second…

  • [FAQ] Boot Linux with 256MB DDR configurations on AM62L EVM

    Part Number: AM62L Tool/software: The FAQ is on how to configure DDR as 256MB to boot Linux on AM62L EVM

  • [FAQ] How to flash u-boot to GPMC-NAND with USB-DFU on AM62L

    Part Number: AM62L Tool/software: AM62L ROM supports boot from ONFI 1.0 compatible 8-bit parallel NAND memory of 2Gbytes or less in size connected to GPMC CS0 with the following geometries and features • 2Kbyte page and spare area of at least 64 bytes…

  • [FAQ] How to flash and boot u-boot from parallel GPMC NAND on AM62L

    Part Number: AM62L Tool/software: AM62L ROM supports boot from ONFI 1.0 compatible 8-bit parallel NAND memory of 2Gbytes or less in size connected to GPMC CS0 with the following geometries and features • 2Kbyte page and spare area of at least 64 bytes…

  • [FAQ] AM62A7: Supported CSI cameras on AM62A

    Part Number: AM62A7 Tool/software: I want to develop CSI camera based applications on AM62A. What are the supported CSI cameras on AM62A?

  • [FAQ] SK-AM62A-LP: How to run a Raspberry Pi camera module 2 (IMX219) on SK-AM62A-LP?

    Part Number: SK-AM62A-LP Tool/software: I have a Raspberry Pi camera module 2 (IMX219). How can I use it with the AM62A SK EVM?

  • [FAQ] J784S4XEVM: How to revert the DDR configuration to 9.2 SDK settings

    Part Number: J784S4XEVM Tool/software: On 10.x SDK how can we revert the DDR configurations done in R5 SPL to 9.2 SDK?

  • [FAQ] MCU-PLUS-SDK-AM243X: K3conf: Capabilities with options(help)

    Part Number: MCU-PLUS-SDK-AM243X Tool/software: Hi Team, I am doing development on AM243x SoC, and ran into issues with the resource allocation. Is there any tool/script like K3conf which runs on Linux Environment? Since, I can't use Linux on my…

View FAQ threads
  • Threads 197752 Discussions