Texas Instruments (TI) Processors support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search processors content or ask technical support questions on Sitara™ processors, digital signal processors (DSP) and automotive processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] How to flash and boot u-boot from parallel GPMC NAND on AM62L

    Part Number: AM62L Tool/software: AM62L ROM supports boot from ONFI 1.0 compatible 8-bit parallel NAND memory of 2Gbytes or less in size connected to GPMC CS0 with the following geometries and features • 2Kbyte page and spare area of at least 64 bytes…

  • [FAQ] AM62A7: Supported CSI cameras on AM62A

    Part Number: AM62A7 Tool/software: I want to develop CSI camera based applications on AM62A. What are the supported CSI cameras on AM62A?

  • [FAQ] SK-AM62A-LP: How to run a Raspberry Pi camera module 2 (IMX219) on SK-AM62A-LP?

    Part Number: SK-AM62A-LP Tool/software: I have a Raspberry Pi camera module 2 (IMX219). How can I use it with the AM62A SK EVM?

  • [FAQ] J784S4XEVM: How to revert the DDR configuration to 9.2 SDK settings

    Part Number: J784S4XEVM Tool/software: On 10.x SDK how can we revert the DDR configurations done in R5 SPL to 9.2 SDK?

  • [FAQ] MCU-PLUS-SDK-AM243X: K3conf: Capabilities with options(help)

    Part Number: MCU-PLUS-SDK-AM243X Tool/software: Hi Team, I am doing development on AM243x SoC, and ran into issues with the resource allocation. Is there any tool/script like K3conf which runs on Linux Environment? Since, I can't use Linux on my…

  • [FAQ] AM625 / AM623 / AM620-Q1 / AM625-Q1 / AM625SIP: Is the eMMC clocks maintained when read and write operations are finished ?

    Part Number: AM625 Tool/software: Hi, I would like to know if the AM6352 continuously maintains the eMMC clock or if it stops it when it finishes the read and write processes. Why asking ? In most eMMC the “patrol” that refreshes and monitors…

  • [FAQ] PROCESSOR-SDK-TDAX: How to enable second DSS instance for TDA4AEN device PSDKRA Display driver?

    Part Number: PROCESSOR-SDK-TDAX Tool/software: This article provides a patch on top of PSDKRA 10.1 release to enable second DSS instance for TDA4AEN device.

  • [FAQ] TDA4VH: EMMC BOOT0 booting from Linux Space

    Part Number: TDA4VH Tool/software: Q1:How can I program bootloader binaries including tiboot3.bin, tispl.bin and u-boot.img to either mmcblk0boot0 or mmcblk0boot1 at linux space instead of u-boot space? Q2:In addition, how can I control which boot…

  • [FAQ] TDA4VM-Q1: Non-sequence camera connection for multi_cam_demo_app

    Part Number: TDA4VM-Q1 Tool/software: Non-sequence camera connection for multi_cam_demo_app.

  • [FAQ] What Ethernet pinmux combinations are valid on AM64x processors?

    Part Number: AM6421 Other Parts Discussed in Thread: SYSCONFIG Tool/software: The AM64x processor family is able to support a total of 4 PRU_ICSSG Ethernet ports and 2 CPSW Ethernet ports. However, due to pinmux restrictions, only a maximum of 5 Ethernet…

View FAQ threads
  • Threads 199054 Discussions