Texas Instruments (TI) Processors support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search processors content or ask technical support questions on Sitara™ processors, digital signal processors (DSP) and automotive processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] AM2432: Loop back clock for RGMII and MII

    Part Number: AM2432 Tool/software: Hi, Customer is asking the following question. When configured to operate as the " MII " Clock source, the signal does NOT needed to be routed back to the RMII_REF_CLK pin ? Customer is refering Datasheet…

  • [FAQ] WINCESDK-AM1XOMAPL1X: Windows CE6 / WinCE BSP Resources

    Part Number: WINCESDK-AM1XOMAPL1X Tool/software: This is a general FAQ page for questions about WinCE6 on TI devices. TI does not currently offer Windows CE6 support. By that we mean, if you have any questions about it, we will not be able to support…

  • [FAQ] TDA4VM-Q1: SR2.0 update Keywriter process

    Part Number: TDA4VM-Q1 Other Parts Discussed in Thread: TDA4VM Tool/software: Hi Customer, This FAQ is about TDA4VM SR2.0 HS Keywriter , there is some change need apply to Default keywriter: 1. Download and Install ti-processor-sdk-rtos-j721e…

  • [FAQ] AM623: How to set spread spectrum for AM623?

    Part Number: AM623 Tool/software: Hi Expert, Our product needs to pass EMC RE test. We referred the thread, https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1384055/am623-lcd_pclk-setting-and-emc-re-issues-for-dpi-interface…

  • [FAQ] Custom board hardware design - Master (Complete) list of FAQs for all Sitara processor (AM62x, AM62Ax, AM62D-Q1, AM62Px, AM62L, AM64x, AM243x, AM335x) families

    Part Number: AM625 Other Parts Discussed in Thread: AM62D-Q1 , , AM623 , , AM620-Q1 , , AM62A7 , AM62A7-Q1 , AM62A3-Q1 , AM62A3 , AM62P-Q1 , AM62P , SK-AM62 , TMDS64EVM , SK-AM64B , SK-AM62B-P1 , SK-AM62-LP , SK-AM62-SIP , SK-AM62B , SK-AM62A-LP , SK…

  • [FAQ] AM625: I/O leakage current

    Part Number: AM625 Tool/software: Hi support team. I'm working now on the product based on the AM62x processor. When reading the datasheet I spotted some information that can affect my design. Does the leakage current for the I/O pins really…

  • [FAQ] AM62A7: AM62A7 VTM thermal shutdown based on which temperature zone temperature？

    Part Number: AM62A7 Tool/software: Hello，teams We would like to confirm which temperature zone the VTM module generates thermal shutdown based on?（Device Temperature） Best regards, XUE Fadong

  • [FAQ] TDA4VM-Q1: TDA4VM Ethernet Loopback Test

    Part Number: TDA4VM-Q1 Other Parts Discussed in Thread: TDA4VM Tool/software: This is the configuration description and test results of the Ethernet loopback test using TDA4VM User guide: https://software-dl.ti.com/jacinto7/esd/processor-sdk-rtos…

  • [FAQ] AM623: Power / GND pins associated with GPMC_CLK

    Part Number: AM623 Tool/software: Which Power / GND pins are most associated with driving the GPMC0_CLK signal for the AM623 AALW package? Our design is experiencing radiated emissions issues where the 7th and 9th harmonics of the GPMC0_CLK are too…

  • [FAQ] PROCESSOR-SDK-AM64X: How to do IPC communication with only two cores ? (say R5FSS0-0 and R5FSS1-1).

    Part Number: PROCESSOR-SDK-AM64X Other Parts Discussed in Thread: SYSCONFIG Tool/software: I am trying to build IPC example for R5FSS0-0 and R5FSS1-1 but getting build issues. Can someone please guide me how to create IPC examples for two cores…

View FAQ threads
  • Threads 198111 Discussions