• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 48 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

AWR2243BOOST: SPI Connection Issue while using DCA1000EVM for data capture

AWR2243BOOST: SPI Connection Issue while using DCA1000EVM for data capture

Sharaf AP
Prodigy 20 points
Part Number: AWR2243BOOST

Tool/software:

This post is in continuation to my previous post - AWR2243BOOST: SPI Connection Issue while using DCA1000EVM for data capture. Unfortunately, that post is locked and I cannot post any replies there.

As mentioned in the Reply, I went through the linked post AWR2243BOOST: SPI connectivity status remains Disconnected, and followed every option specified there. However, in all cases, I am seeing the SPI connection issue and I am getting exactly the same behavior as mentioned by the original author. 

In the original post, finally, it is concluded that the issue could be hardware-related and the TI expert recommended replacing the hardware. In my case also I am seeing the exact same behavior, so what should I do?

Do I need to get the hardware replaced?

  • 0
    TI__Mastermind 28015 points

    Hello,

    Although you have mentioned you have followed the same steps as the other discussion, can you please share photos of your hardware setup and connections?

    Has this setup worked in the past or is it a new setup?

    Regards,

    Adrian