• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 2 answers
  • Subscribers 30 subscribers
  • Views 723 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Linux/DCA1000EVM: RADAR Heatmap Images from DCA1000EVM Real-time data capture adapter

Chris Monaco
Prodigy 70 points
Part Number: DCA1000EVM

Tool/software: Linux

Does the DCA1000EVM real-time data capture adapter support publishing the RADAR (FFT) Images (Range vs. Azimuth heatmaps)?

I'm having difficulty finding out which data is available and how I can parse the Ethernet packets.

Thanks so much!

  • 0
    TI__Guru*** 143384 points
    Hi,

    With the DCA1000 EVM one can capture the raw sensor adc data.

    This means that any processing of the data has to be performed offline, with tools such as matlab.

    thank you
    Cesar
  • 0 in reply to Cesar
    Prodigy 70 points

    Thank you.

    If this is the case, does TI offer software than can then post-process this recorded data? I see vague references to scripts and "Radar Studio" in the forums, but no references in official user's guides. If you can point me in the right direction, it would be greatly appreciated.

    -Chris Monaco

  • 0 in reply to Chris Monaco
    TI__Guru*** 143384 points
    The official name is "mmWave Studio". Please download from this link.

    There is a user's guide included in the docs folder

    www.ti.com/.../MMWAVE-STUDIO

    Thank you
    Cesar