• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 52 subscribers
  • Views 476 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

"Tools->Tr​ace Control" cannot open on Win7 64, CCS 5.3

Paul Singh
Expert 2750 points
Dear CCS team,
 
I am using Windows 7 Professional 64 bit and 5.3.0.00090, and my emulator is Spectrum Digital XDS560V2 STM.
When I followed

http://processors.wiki.ti.com/index.php/Debug_and_Trace_Capabilities_on_OMAPL1X/AM1x/DA8x_devices

instructions to open "Tools">>"Trace Control" window and tried to select ETB as the receiver, CCS always hangs for several dozes of seconds, and after it resumes I cannot see the "Trace System Control" window appears.
The Win 7 system has UAC (user account control) on, but I also set CCS to run under Administration permission.
In addition, both Windows Firewall and another Firewall (Comodo for my case) reported Internet connection attempts by some program after clicking "Tools>>Trace Control", and I allowed all in the firewall settings. These prompts allowed only one time and didn't appear later.
 
A screenshot of the situation is attached.
 
Could someone tell me how could I enable the "Tools>>Trace Control" window?
 
 
Trace Control menu not showing (between a user and ) seems to be about the same issue in a 64 bit Linux setting. But in my 64-bit Win 7  I have already set the Administrator permission. What else should be done?
 
 
Paul
 
  • 0
    Expert 2750 points

    Update:

    This is solved. The other firewall (Comodo)'s some existing setting has blocked it. After allowed all related programs, or simply disable the firewall I was able to see the "Trace Control" window.