Frequent Questions

  • [FAQ] TUSB1002A: [FAQ] Purpose of the 330nF capacitors for the USB connector to the SuperSpeed RX and is it required?

    Part Number: TUSB1002A Tool/software: What is the purpose of the 330nF capacitors on the SuperSpeed RX and is it required?

  • [FAQ] AM625 / AM623 / AM620-Q1 / AM62Ax / AM62D-Q1 / AM62Px / AM64x / AM243x (ALV) Design Recommendations / Custom board hardware design – POK VMON Voltage Monitor

    Part Number: AM625 Other Parts Discussed in Thread: AM623 , AM6546 , AM6442 , AM2432 , TDA4VH-Q1 , TDA4VH Tool/software: HI TI experts, I have queries related to the voltage monitoring capability of the SOC POK module types, accuracy., design recommendations…

  • [FAQ] MCU-PLUS-SDK-AM243X: How to enable multiple Ethernet Ports on AM64x/AM243x

    Part Number: MCU-PLUS-SDK-AM243X Tool/software: Hi, I want to enable multiple Ethernet ports on AM64x/AM243x using MCU+ SDK. Can you provide info about the use case? Regards

  • [FAQ] Can I use different voltages with Texas Instrument I2C TCA Switches/Multiplexers? (What is Voltage level Translation?)

    Part Number: TCA9548A Tool/software: The TCA family of Texas Instruments I2C switches all support voltage translation. It's important to use the correct Vcc for the I2C switch to separate the voltages when channels are enabled. The only requirement…

  • [FAQ] AM2431: Use of latch in Boot pins

    Part Number: AM2431 Tool/software: Hello, We are not using GPMC interface in AM2431 MCU. So, the boot signals are not getting multiplexed. In that case, can use these pins directly for Boot configuration without transceiver? Regards, Salini

  • [FAQ] PROCESSOR-SDK-AM64X: Create Multicore Appimage using System Project

    Part Number: PROCESSOR-SDK-AM64X Other Parts Discussed in Thread: SYSCONFIG Tool/software: How to create multicore appimage using the system project ?

  • [FAQ] MCU-PLUS-SDK-AM243X: What are the possible Ethernet configurations on ICSSG0/1

    Part Number: MCU-PLUS-SDK-AM243X Other Parts Discussed in Thread: SYSCONFIG Tool/software: Hi, What are the possible Ethernet configurations on ICSSG0/1? Regards

  • [FAQ] TPS2HCS10-Q1: CRC Calculation Function Example

    Part Number: TPS2HCS10-Q1 Tool/software: The TPS2HCS10-Q1 and other TI Smart eFuse High-Side Switch devices has an optional cyclic redundancy check (CRC) feature to ensure each SPI frame (SPI Format: COPL = 0, CPHA = 1) is transmitted and received…

  • [FAQ] TINA-TI: How to model multi-winding flyback and fly-buck transformers in TINA

    Part Number: TINA-TI Other Parts Discussed in Thread: LM5180EVM-DUAL Tool/software: Many TI ICs support TINA simulations, including the LM5180 Primary Side Regulated (PSR) flyback device and LM5160 Fly-buck device. It is well known that a flyback or fly…

  • [FAQ] DS320PR1601: Do TI PCIe redrivers require a PCIe Reference Clock for operation?

    Part Number: DS320PR1601 Tool/software: Do TI PCIe redrivers require a PCIe Reference Clock (REFCLK) for operation?

View FAQ threads
Recommended For You