Frequent Questions

  • [FAQ] TUSB8041A: Can USB hub be cascaded?

    Part Number: TUSB8041A Tool/software: Cascading USB hubs means to connect a root USB hub to the next tier which has another one or more hubs and few other devices and carrying forth in multiple tiers of hubs and devices . The USB standard specifies the…

  • [FAQ] CC2340R5: CCS Theia is now available!

    Part Number: CC2340R5 Other Parts Discussed in Thread: SYSCONFIG , , CC2340R2 Tool/software: CCS Theia Code Composer Studio is transitioning to Theia from Eclipse Theia is an open-source initiative to provide a VS Code® “like” application framework…

  • [FAQ] LMH1297: SDI and Ethernet CDRs eye diagram capture

    Part Number: LMH1297 Tool/software: SDI and Ethernet retimers provide a feature to capture: 1). HEO/VEO indicating horizontal and vertical eye opening 2). Additionally one can capture post equalized eye diagram as well. Attached file discusses…

  • [FAQ] BQ25756: How do I work with the ADC

    Part Number: BQ25756 Tool/software: Hello, The BQ2575X ADC can measure the TS voltage, VFB voltage, input voltage, input current, battery voltage, and battery current. The ADC can also measure the system voltage if the SYS pin is present. The ADC…

  • [FAQ] TDA4VH-Q1: Achieving Functional Safety with Boot

    Part Number: TDA4VH-Q1 Tool/software: Provide the steps to integrate SDL functional safety modules such as BIST, POK, VTM and TOG with the PDK Boot Application.

  • [FAQ] AM62A3: CPSW3G RGMII phy-less interface to external switch

    Part Number: AM62A3 Tool/software: Hi, a customer is using the AM62A and connects to an external ethernet switch with the RGMII interface. We are looking at the appnote https://www.ti.com/lit/an/sprad07/sprad07.pdf The design currently does…

  • [FAQ] UCC21750-Q1: Isolated Gate Drivers Power up Sequence

    Part Number: UCC21750-Q1 What is the typical power up sequence for UCC217xx family of devices:

  • [FAQ] MCU-PLUS-SDK-AM243X: How-to test FSI in a 2-device loopback on AM243x LP or EVM

    Part Number: MCU-PLUS-SDK-AM243X Tool/software: Hi, AM243x MCU SDK includes an FSI internal loopback example, but I would like to test an external loopback using 2 boards. How can I do it?

  • [FAQ] MCU-PLUS-SDK-AM243X: How-to test FSI external 1-device loopback on AM243x LP or EVM

    Part Number: MCU-PLUS-SDK-AM243X Other Parts Discussed in Thread: SYSCONFIG Tool/software: Hi, AM243x MCU SDK includes an FSI internal loopback example, but I would like to test an external loopback in my board. How can I do it?

  • [FAQ] AM263P4: How to debug XiP application in AM263PX

    Part Number: AM263P4 Other Parts Discussed in Thread: UNIFLASH Tool/software: H ow to create and debug XIP application in AM263PX (DEV/OSPI boot mode)?

View FAQ threads
Recommended For You