Frequent Questions

  • [FAQ] SK-TDA4VM: How to create Object Detection Reference Design using Edge Impulse platform on TDA4VM-SK

    Part Number: SK-TDA4VM Other Parts Discussed in Thread: TDA4VM Edge Impulse is a tool for creating, analyzing, and deploying machine learning to embedded targets. TI Processors, like the TDA4VM and AM62x, running the default Processor SDK for Linux…

  • [FAQ] SK-TDA4VM: How to create Object Classification Reference Design using Edge Impulse platform on TDA4VM-SK

    Part Number: SK-TDA4VM Other Parts Discussed in Thread: TDA4VM Edge Impulse is a tool for creating, analyzing, and deploying machine learning to embedded targets. TI Processors, like the TDA4VM and AM62x, running the default Processor SDK for Linux…

  • [FAQ] AM625 / AM623 / AM620-Q1 / AM625-Q1 / AM625SIP / AM62A7 / AM62A3 / AM62A1-Q1 / AM62D-Q1 / AM62P / AM62P-Q1 / AM62L Custom board hardware design – Queries regarding Crystal selection and clock specifications

    Other Parts Discussed in Thread: SK-AM62 , SK-AM62-LP , AM62P , AM62D-Q1 , AM62A3 , AM62A7-Q1 , AM62A3-Q1 , AM62A7 , AM62P-Q1 , AM62L , AM620-Q1 , AM625 , AM623 , AM625-Q1 , AM625SIP , AM6442 , LMK1C1104 , AM3352 , OMAP-L138 Hi TI Experts, I have the…

  • [FAQ] How do I optimize an Impedance Track gauge for low temperatures?

    Other Parts Discussed in Thread: GPCRB , BQSTUDIO , EV2400 At temperatures at or below 0 º C the Impedance Track algorithm will require an extra step to improve the gauging accuracy. If low temperatures are expected in the end application this step will…

  • [FAQ] TI15.4 Stack: What happens to a 15.4 network after collector reset or power loss?

    After a collector reset, it will lose its information on connected devices. However, the sensor will still have these available. If the power loss is to short for the sensor to notice that the collector was offline, it will not go to orphan state. As…

  • [FAQ] ADS7128: Using the RMS module

    Part Number: ADS7128 Hello! How do you use the Root-Mean-Square module in the ADS7128?

  • [FAQ] LMH34400: Giving Wall-E better eyesight with LiDAR

    Part Number: LMH34400 LiDAR, Light Detection and Ranging, is an emerging technology to help advance the industry-wide movement towards autonomy and safety. To get up to speed on the architecture of these technologies and learn more about recommended…

  • [FAQ] MCU-PLUS-SDK-AM263X: How to perform Real time debug using Memory Browser Window

    Part Number: MCU-PLUS-SDK-AM263X How to view the variables/ registers in real time without pausing R5 core in CCS? How to debug using Memory Browser Window in CCS? How to use DAP to connect to Memory Browser in CCS for AM263x

  • [FAQ] Link for download old versions of HALCoGen

    Other Parts Discussed in Thread: HALCOGEN Link for download old versions of HALCoGen which is used as configuration tool for Hercules devices like RM42x, RM46x, RM57x, TMS570LSx and TMS570LCx.

  • [FAQ] AM625: Adding SD card (mmc1) support to skeleton DTS

    Part Number: AM625 Other Parts Discussed in Thread: SK-AM62 Hello, I'm using tisdk-base-image and k3-am625-skeleton.dts on SK-AM62 as a starting point. I modified k3-am625-skeleton.dts to enable mmc0 & mmc1, but mmc1 does not seem to be recognized…

View FAQ threads
Recommended For You