Part Number: TPS3842 I need to monitor and sequence 3 power supply rails. The main bus voltage in my design is 12V, followed by LDOs for 5V, 3.3V, and 1.8V. Can please provide the simplest solution? Also board size is very limited so I need smallest…

Part Number: MSPM0-SDK This thread is used to update the software or hardware update for application note of Low cost AC motor control solution based on MSPM0 and Triac. 5466.Resource_HW&FW.zip

Part Number: CC2674P10 Other Parts Discussed in Thread: CC2674R10 , CC1314R10 , CC1354P10 , CC1354R10 , CC2755R10 , CC2755P10 Q1: What security features are available on CC2674 and CC13x4 devices? A: The CC2674 and CC13x4 (CC2674R10, CC2674P10, CC1314R10…

Part Number: TDA4VL-Q1 What is the effort required by the system integrator to enable and test ECC on the different IPs on the SoC using ECC aggregators?

Part Number: INA228 Other Parts Discussed in Thread: SYSCONFIG I’m reading the current register value, but the result is wrong. Why am I not reading the value that I expect to be reading?

Part Number: BQ25785EVM Other Parts Discussed in Thread: BQ25785 , BQSTUDIO Please see attached for the BQ25785 BQZ file to be used with BQSTUDIO software. To use the GUI you will need to download Battery management studio software from TI.com, then…

Part Number: INA238 Other Parts Discussed in Thread: PCA9306 , TCA9517 I’m getting a “no acknowledge” (NACK) when I try to communicate with the power monitor.

Part Number: TDA4VL-Q1 Other Parts Discussed in Thread: TDA4VL What are the recommended POK TRIM value settings for each POK instance?

Part Number: AM625 Other Parts Discussed in Thread: AM62A74 HI TI experts: Customer is measuring the eFuse current and does not seem to be seeing the 400mA current specified in the data sheet. Customeris asking for the current transient waveform.…

Part Number: TDA4VH How to enable falcon boot on J784S4 11.02 Linux SDK ? Boot Flow: R5 SPL -> ATF -> OPTEE -> Kernel Regards Gokul