Frequent Questions

  • [FAQ] TLA2518: Channel 0 does not work properly as a GPIO

    Part Number: TLA2518 Other Parts Discussed in Thread: ADS7038 , ADS7028 When configuring Channel 0 as a GPIO, the pin does not function as expected. When configured as a GPIO push pull, the pin is always high; and when GPIO0 is configured as an open…

  • [FAQ] PSPICE-FOR-TI: Where do I find the installation log, cdsPspiceTIlog.txt?

    Part Number: PSPICE-FOR-TI When troubleshooting problems with PSpice for TI or TI-developed PSpice models, we may need certain log files. The file locations are often determined by Microsoft Windows environment variables such as "HOME" and "APPDATA…

  • [FAQ] TMAG5110-Q1: What is the role of Hall-effect sensors in car window and sunroof motor modules?

    Part Number: TMAG5110-Q1 What is the role of Hall-effect Sensors in window modules and sunroofs? This FAQ gives a brief overview of how 2D Hall sensors can be used for motor monitoring in window motor modules. For a more treatment of how the mechanics…

  • [FAQ] TMS320C6657: Quick start Guide C6657 and C6657-EVM

    Part Number: TMS320C6657 Other Parts Discussed in Thread: CCSTUDIO Hi, Would you please provide a " Quick start Guide C6657 and C6657-EVM " to enable a quick product development ?

  • [FAQ] AM6442: question about MCU_OSC0 Start-up

    Part Number: AM6442 Team, I have a question about "Figure 7-16. MCU_OSC0 Start-up Time" from the datasheet. Here it looks like that MCU_OSC0 is only allowed to start when VDD_MCU is ramping. In reality the osciallation starts already with VDDS_OSC0…

  • [FAQ] TUSB8041: How do I test USB 3.0 / USB 3.1 / USB 3.2 Electrical Compliance on USB Hubs?

    Part Number: TUSB8041 Other Parts Discussed in Thread: TUSB8040 , , TUSB8020B , TUSB8042 , TUSB8042A USB 3.0 / 3.1 / 3.2 SuperSpeed 5 Gbps electrical compliance testing requires an oscilloscope and BERT from an approved vendor, as well as dedicated SuperSpeed…

  • [FAQ] Recover LaunchPad debugger ez-FET: MSP-EXP430F5529LP: No USB FET was found

    Part Number: MSP-EXP430F5529LP Other Parts Discussed in Thread: MSP430F5529 , UNIFLASH , ENERGIA , MSP-FET , MSP-FLASHER , MSP430F5528 Hi everybody, I have a new MSP-EXP430F5529LP board, but I can't get it to work. Connecting the EVM to the PC via…

  • [FAQ] TAS2563: PDM Interface

    Part Number: TAS2563 How is PDM interface configured in TAS2563?

  • [FAQ] AM62x: CLKOUT0 for RMII_50MHz_CLK and PHY_REFCLK connection

    In below diagram, CLKOUT0 to drive 4 terminal need external buffer. If CLKOUT0 only drive 2 terminal, can it just connected together or with resistors like below.

  • [FAQ] TPS51200: TPS51200 vs TPS51206

    Part Number: TPS51200 Other Parts Discussed in Thread: TPS51206 What is the difference between the TPS51200 and the TPS51206?

View FAQ threads
Recommended For You