Frequent Questions

  • [FAQ] 3D CNN / Pooling TO 2D CONVERSION FOR TIDL

    Part Number: PROCESSOR-SDK-RTOS-J784S4 OVERVIEW TIDL's C7x DSP only runs 2D convolution and 2D pooling. This tool rewrites Conv3D, MaxPool3D, and AveragePool3D nodes in an ONNX model into equivalent sequences of 2D operations. The conversion is mathematically…

  • [FAQ] ADS125H18: How to implement open wire detection in analog input modules?

    Part Number: ADS125H18 Does Texas Instruments have any collateral demonstrating how to detect an open wire in an industrial automation application, for example PLC analog input modules?

  • [FAQ] TPS25751A: [FAQ] TPS25751, TPS25751A, TPS26750, and TPS26750A PP5V Design Requirements

    Part Number: TPS25751A Q: Does the TPS25751A controller require both PP5V and PPHV to operate? A: While the DRP device can operate in a sink-only mode using only the VBUS supply, sourcing mode requires both VIN_3V3 and PP5V. During the initial…

  • [FAQ] MSPM0C1104: Realization of Password-Protected Debug Based on Software

    Part Number: MSPM0C1104 Here are the code resoucese for: www.ti.com/.../slaaeq5.pdf Script.zip SWDwithPassword_code.zip

  • [FAQ] F29H850TU: CPU3 Code Provisioning failing using UART in HSSE

    Part Number: F29H850TU Code Provisioning fails for CPU3 application image/binary using UART on HSSE F29x.

  • [FAQ] AM625: errata i2493 potential of eMMC write failures fix

    Part Number: AM625 Background: i 2493 MMCSD: HS200 write failures Details: The MMC0 interface has the potential for write failures when issuing multiple block writes operating in HS200 mode with excessive IO supply noise. To minimize IO supply noise…

  • [FAQ] XTR105: XTR105: Calculating Rg & Rlin

    Part Number: XTR105 Hello, Do resources exist to calculate Rg and Rlin1/Rlin2 for 2-wire and 3-wire configurations? All the best, Carolina

  • [FAQ] F29H850TU: SDK Crypto Examples don't work when loading through CCS debugger in HSFS.

    Part Number: F29H850TU When i load a crypto example from the SDK through the ccs debugger and run it from the same, it doesn't work until i give an XRSn or a PORSn.

  • [FAQ] LM74700-Q1: Importance of TVS+ diode and how to choose it for automotive application with Ideal diodes?

    Part Number: LM74700-Q1 Other Parts Discussed in Thread: LM74720-Q1 , LM74800-Q1 , LM74900-Q1 , LM74930-Q1 , LM74502-Q1 , LM74500-Q1 , LM74912-Q1 What is the need of TVS+ in bidirectional or unidirectional diode when used with ideal diode controllers…

  • [FAQ] J784S4XEVM: Automatic Mixed Precision Runs Very Slowly and Generates Large Intermediate Files

    Issue When running Automatic Mixed Precision (AMP) with TIDL, users may observe: - AMP runs for an extremely long time without completing - Hundreds of gigabytes of intermediate trace files accumulate on disk Root Cause AMP works by running the…

View FAQ threads
Recommended For You