Frequent Questions

  • [FAQ] DLPLCR9000EVM: FPGA used in the DLP LightCrafter 9000 EVM

    Part Number: DLPLCR9000EVM What is the FPGA functionality in the DLP Lightcrafter 9000 EVM?

  • [FAQ] DLPLCR9000EVM: DLP Lightcrafter 9000 EVM only activates half the DMD when using DisplayPort

    Part Number: DLPLCR9000EVM I can only get my DLP LightCrafter 9000 EVM to activate half the DMD when using DisplayPort.

  • [FAQ] DLPLCR6500EVM: DLPLCR6500EVM: What light engines are available for the DLP LightCrafter 6500?

    Part Number: DLPLCR6500EVM I want to evaluate the DLP6500 digital micromirror device using the DLP LightCrafter 6500. I see the kit includes electronics only. Where can I find compatible light engines to use with these electronics?

  • [FAQ] Things to consider with high voltage measurements with op-amps?

    Other Parts Discussed in Thread: ANALOG-ENGINEER-CALC , TLV313 If your circuit has a high voltage measurement circuit, there are many things to consider. Have you considered the effects of temperature? The voltage coffiecient of the resistors?

  • [FAQ] Current Sensors and Power Monitors FAQ Links

    Many postings in the E2E Forum can be designated as a Frequently Asked Question or FAQ. In order for you to quickly create a system and implement a current and power sensing solution here is a curation of links to these FAQ postings. As time goes on more…

  • [FAQ] OPT8241: DC-DC converter choice for designing 3D ToF cameras

    Part Number: OPT8241 Other Parts Discussed in Thread: TPS92515 , LM3429 , LM3409 What are some guidelines for choosing DC-DC converters for designing 3D ToF cameras?

  • [FAQ] MSP430FR4133: Production Issue - Male BoosterPack Headers Missing

    Part Number: MSP430FR4133 Other Parts Discussed in Thread: MSP-EXP430FR4133 , BOOSTXL-BATPAKMKII We have discovered an issue on some MSP-EXP430FR4133 LaunchPad where the male pins on the J1, J2, and J3 headers (the BoosterPack headers) were clipped…

  • [FAQ] INA181: Understanding the Output Swing of Current Shunt Monitors and Amplifers

    Part Number: INA181 Other Parts Discussed in Thread: INA199 How to interpret and utilize the output swing specifications of current sense amplifiers so I can get the most out of my current measurements?

  • [FAQ] INA3221: Why are some current sense amplifier defined as high-side when common mode range is down to -0.3V to 26V.

    Part Number: INA3221 Other Parts Discussed in Thread: INA219 , INA226 Why is the INA3221 and INA219 presented as high side devices when there common mode rage is -0.3V - 26V.

  • [FAQ] How to Enable DSxxxDFxxx to Lock to Any Data Rate within VCO Range

    Part Number: DS280DF810 Other Parts Discussed in Thread: SIGCONARCHITECT In this example, we use a non-standard data rate - for example 24.33Gbps - and configure register settings to lock to this data rate. Note: Data rate MUST be within the device…

View FAQ threads
Recommended For You