Frequent Questions

  • [FAQ] AM263P4: Enabling XIP in AM263PX

    Part Number: AM263P4 Tool/software: How to create and enable XIP in AM263PX (step-by-step guide)?

  • [FAQ] TDA4VM: How do we avoid UDMA resource conflict issues when integrating the MCAL Eth module with other modules?

    Part Number: TDA4VM Other Parts Discussed in Thread: SYSCONFIG Tool/software: How do we avoid UDMA resource conflict issues when integrating the MCAL Eth module with other modules?

  • [FAQ] TDA4VH: How do we enable all eight(8) external ports of CPSW9G in TDA4VH using TI EVM?

    Part Number: TDA4VH Tool/software: How do we enable all eight(8) external ports of CPSW9G in TDA4VH using TI EVM?

  • [FAQ] TXS and LSF devices support Open-Drain and Push-Pull applications. How do I choose Open-Drain or Push-Pull Mode?

    FAQ: Logic and Voltage Translation > Auto-Bidirectional Level-Shifters >> Current FAQ The devices do not choose the mode. The mode is based on the devices connected to the TXS / LSF devices. I.e. These are the two devices that are connected to the…

  • [FAQ] How can I estimate Data Rate Frequency not given for my voltage level?

    Other Parts Discussed in Thread: TXV0108-Q1 FAQ: Logic and Voltage Translation > Fixed DIR / DIR CNTRL Level-Shifters >> Current FAQ Data rate depends on the system designers tolerance for various parameters such as VOL / VOH levels, duty cycle distortion…

  • [FAQ] Should I use Auto-Bidirectional level-shifters for Fixed directional applications?

    FAQ: Logic and Voltage Translation > Auto-Bidirectional Level-Shifters > Fixed DIR / DIR CNTRL Level-Shifters >> Current FAQ Do not use auto-bidirectional level-shifters if the below is applicable. Use fixed or direction control level-shifters instead…

  • [FAQ] Fixed DIR / DIR CNTRL Level-Shifters

    FAQ: Logic and Voltage Translation > Fixed DIR / DIR CNTRL Level-Shifters >> Current FAQ [FAQ] Should I use Auto-Bidirectional level-shifters for Fixed directional applications? [FAQ] Can I estimate Data Rate Frequency not given for my voltage level…

  • [FAQ] Auto-Bidirectional Level-Shifters

    FAQ: Logic and Voltage Translation > Auto-Bidirectional Level-Shifters >> Current FAQ [FAQ] Should I use Auto-Bidirectional level-shifters for Fixed directional applications? [FAQ] How do the LSF translators work? [FAQ] What is the difference…

  • [FAQ] IxC and SPI

    FAQ: Logic and Voltage Translation > IxC and SPI (CTRL + F) or (CMD + F) to search key words on this page! Level Translation: [FAQ] How do the LSF translators work? [ FAQ] What is PassFET Hangtime? Buffers: [FAQ] What is a buffered…

  • [FAQ] TDA4VM: How do I resolve these compilation errors when building PDK examples?

    Part Number: TDA4VM Tool/software: I am trying to resolve the following errors when attempting to build examples within the RTOS PDK. How can I resolve these errors? SDK: 9.0+ Error Log 1: ti/ti-processor-sdk-rtos-j721e-evm-09_02_00_05/pdk_jacinto_09_02_00_30…

View FAQ threads
Recommended For You