Frequent Questions

  • [FAQ] AM62L ( AM62L32 , AM62L31 ) Design Recommendations / Custom board hardware design - Processor Reset inputs, Reset Status Output and Connection recommendations

    Part Number: AM62L Other Parts Discussed in Thread: AM625 , TDA4APE-Q1 , AM62A7 Tool/software: HI TI experts, I have queries related to supported reset inputs and reset status outputs Supported Reset inputs Recommended connections for Reset…

  • [FAQ] AM62L: DDR4 guidelines for impedance values

    Part Number: AM62L Tool/software: Customer Query: In our design we are using the DDR4 interface. In your DDR4 guidelines you have mentioned 40 ohms for single-ended and 80ohms for the differential pair. Is it mandatory to follow these impedance…

  • [FAQ] RS-485 / RS-422 Transceiver Resources

    [Click here to return to Transceiver Homepage] Welcome to the RS-485 / RS-422 Transceivers E2E page! Listed below are a variety of resources to assist with the implementation of RS-485 and RS-422! Note that many RS-485 resources also apply to RS…

  • [FAQ] MCU-PLUS-SDK-AM263PX: AM263Px: In dev boot mode terminating and relaunching the debug session does not take care of SoC reset

    Part Number: MCU-PLUS-SDK-AM263PX Tool/software: Hi Experts, In dev boot mode terminating and relaunching the debug session does not take care of SoC reset. The SoC needs manually power on reset for next debug session to launch correctly. It does…

  • [FAQ] What is the difference between the HDC3120 and the HDC3020

    Part Number: HDC3120 Other Parts Discussed in Thread: HDC3020 , Tool/software: What's the difference between the HDC3120 and the HDC3020/3021/3022? Is there a filter or tape option available?

  • [FAQ] INA333: Articles from Precision Hub and The Signal

    Part Number: INA333 Tool/software: Making Your Own Difference Amp—sometimes 1% resistors are good enough “I Need High Input Impedance!” “Typical”—what does it mean in a data sheet specification? 2-Wire 4-20 mA Sensor Transmitters: Background…

  • [FAQ] AM2434, AM2432, AM2431 (ALV, ALX packages) Custom board hardware design – Collaterals to Get started

    Part Number: AM2434 Other Parts Discussed in Thread: AM6412 , AM6422 , AM6442 , , TPS65220 , TPS65219 , TMDS243EVM , TMDS243DC01EVM , TMDS64DC01EVM , LP-AM243 , BP-AM2BLDCSERVO , BOOSTXL-IOLINKM-8 , TMDS64EVM , SK-AM64B , AM6411 , AM6421 , AM6441 , AM2432…

  • [FAQ] AM2612: Changing AM261x CPU core frequency

    Part Number: AM2612 Other Parts Discussed in Thread: SYSCONFIG Tool/software: The AM261 datasheet indicates multiple core frequencies can be selected, how can I change the core frequency for my application? When using GEL-based development…

  • [FAQ] TAS2505: TAS2505: Can TAS2505 achieve 32dB gain?

    Part Number: TAS2505 Tool/software: TAS2505 reference guide claims the device can perform a 32dB gain, is this accurate?

  • [FAQ] TDA4VM: How do I run MCU CPSW2G Enet examples on Main Domain R5F cores?

    Part Number: TDA4VM Other Parts Discussed in Thread: TDA4VH Tool/software: How to run MCU CPSW2G ENET examples on Main domain R5F cores like MCU2_0 or MCU2_1?

View FAQ threads
Recommended For You